SEBO Power Supply Cord for AUTOMATIC X4, X5, X7, X8 and ESSENTIAL G Series — Dark Gray

Ten machines share one lead. Order code 5450DG is the dark gray mains cord fitted to the AUTOMATIC X4, X4 Boost, X5, X7 Premium, X7 Pet and X8 and to the ESSENTIAL G1, G2, G4 and G5. SEBO shows it as item 4 on the ESSENTIAL G4/G5 sheet. The cord measures 40 ft and uses 17/2 wire, which is the working reach these uprights were built around.

The drawing makes its route plain. The lead passes through the grommet at item 3, directly below the handle assembly at item 1, and runs down to the switch at item 5, with the cable clamp at item 8 holding it against strain. Anything interrupting that run calls for a complete cord rather than a splice: a break at the plug, a conductor severed at the point where it disappears into the handle, or a jacket crushed under a door.

Two habits make a new cord last. Thread it through every original clamp and guide so the strain falls where the design intends it to, and avoid winding it into tight loops by hand, since cords fail at the sharp bends they are repeatedly forced into rather than along the free run.

• Order code: 5450DG
• Reach: 40 ft
• Wire: 17/2
• Shade: dark gray
• AUTOMATIC uprights: X4, X4 Boost, X5
• Also covered: AUTOMATIC X7 Premium, AUTOMATIC X7 Pet, AUTOMATIC X8
• ESSENTIAL uprights: G1, G2, G4, G5
• Drawn at: item 4 on the ESSENTIAL G4/G5 sheet
• Around it there: grommet 5359HE, switch 05113, cable clamp 5162

Searches for a SEBO 40 ft power cord, an AUTOMATIC X8 mains lead or an ESSENTIAL G4 cord replacement all arrive at this code.

Mains terminations suit someone comfortable with them or a service centre. Genuine SEBO cord, shipped in 2-5 business days.