SEBO Bag Holder with Safety Catch for C1.1, C2.1 and C3.1

Every filter bag on a C-series canister hangs from a moulded holder, and 6094 is that holder supplied complete with the 6170ER safety catch and its spring. The collar grips the bag's card mount, holds the inlet square to the port, and the catch is what stops the machine being run with no bag in place.

A worn holder lets the card sit crooked, which breaks the seal at the inlet and sends debris into the compartment instead of into the bag. A distorted or seized catch is worse again, since it either blocks the door or defeats the protection it exists to provide. This assembly renews both at once.

• Fits: SEBO C1.1, C2.1 and C3.1
• Supplied: complete holder with the 6170ER safety catch and spring
• Function: locates the bag collar against the inlet port
• Part number: 6094
• Already fitted inside: the complete white bag cover 6093GW, which arrives with 6094 on it

Dust loose in the bag compartment, a bag that will not sit flat, or a door that fights the catch are the three symptoms that lead here. Owners searching for a SEBO C series bag holder or a bag catch replacement are almost always describing one of them.

The holder mounts on the inside of the bag door, so the job begins with the door open and the old bag out. On a machine where the cover moulding has also cracked, SEBO sells the door complete with this holder already fitted as 6093GW, which saves transferring parts across.

The bags themselves are boxed as 5093AM, or as Service Box C, 6198AM, which adds a microfilter and an exhaust filter to ten paper bags. The seal the cover closes onto is 6187, the pre-motor microfilter is 6191AM and the exhaust filter is 6033AM. Genuine SEBO from an authorized SEBO dealer. Ships in 2–5 business days.