SEBO Bag Cover Axle Set for AIRBELT D1 Turbo and D4 Premium

The bag compartment door on a SEBO D series canister swings on a pair of pivots rather than a moulded hinge, and 6750ER is the set of pivot hardware for them. SEBO catalogues it as position 24 of the AIRBELT D parts sheet, a few numbers along from the filter bag spring at 23 and the bag cover seal at 34 — the three components that together decide whether the compartment actually closes airtight.

That grouping is the useful part. The axle set carries the door, the 8130 seal is the face it lands on, and the 8140ER spring behind it pushes the 8120AM AeraPure bag forward against its holder. Worn pivots let the door drop a millimetre or two at one end, so it meets the seal unevenly and the compartment breathes. What the owner notices is a door that sags open, feels gritty through its travel or springs back instead of latching, followed by dust around the cover edge and weaker pull at the floor tool.

• Part number: 6750ER
• Fitment: SEBO AIRBELT D1 TURBO and D4 PREMIUM
• Contents: the axle set for the bag compartment door
• Diagram position: 24, AIRBELT D parts sheet
• Adjacent numbers: 8130 cover seal at 34, 8140ER bag spring at 23
• Fixes: a sagging, stiff or non-latching bag cover
• Consumable it serves: 8120AM AeraPure filter bags for these canisters

SEBO also catalogues a bag indicator adjuster at position 33 of the same sheet, part 8127ER, which is worth knowing about if the bag light behaves oddly once the cover shuts properly again. Searches for a SEBO bag cover axle, a D series hinge pin set or a D4 Premium cover pivot all lead to this kit.

With the cover off, run a finger round the seal: perished rubber there undoes the benefit of new pivots, and both are quick jobs while the machine is open. Factory SEBO pivot parts, supplied by an authorized dealer and usually with you inside 2–5 business days.