SEBO Back Cover, TS-Neck, for FELIX Premium and ET-1 Power Heads — Light Gray

Matching the pale housings, this rear panel caps the back of the head where the TS-neck joins it, and carries part number 2947HG. It is the light gray version of the moulding; darker machines take 2947GS instead, so pick by the colour of the trim already on the head rather than by the shape of the part.

The FELIX schematic lists it at position 115, directly after the swivel neck wiring at 114 and before the metal segment set at 116. A cover with a corner missing is worth attending to promptly, because the gap is exactly where fine dust settles onto the neck hardware. The panel also does quiet structural work, tying the rear of the head together at the point where the neck loads it, which is why a badly cracked one can make the whole joint feel softer than it should.

• Part number: 2947HG
• Colour: light gray
• Fits: FELIX Premium, and ET-1 power heads with or without the on/off switch
• Diagram position: 115 on the FELIX parts sheet
• Mounting: uses the original fasteners, no drilling
• Other finish: 2947GS in gray black
• Related part numbers: 0876ER swivel neck wiring, 2950ER segment set, 2945HG light gray slide, 2951HG light gray socket cover

Anyone searching for a SEBO FELIX Premium back cover replacement is usually looking at a split corner or a lost panel, and both are worth fixing before grit reaches the neck. The panel comes off with the same screws that hold it, so the only real preparation is noting which fastener came from where before the old moulding is lifted away. With the back of the head open it costs nothing extra to look at the segments and slide inside the joint, since those are the parts that quietly decide how the machine steers. Genuine SEBO stock held under an authorized dealer account. Ships in 2–5 business days.